10
11/2012
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
Mail: [email protected]
PI_PUK-uk 1 A
1
Initiate
Power supply and control unit
press shortly
LED blinks
programming mode of the system is ON
2a
Programming via voice communication
or
establish voice communication
to the front-door station
press button shortly
... a ring tone sounds at the front-door
and indoor station
1)
2b
Alternatively:
programming via floor push button
(if the indoor station is not accessible)
+
Press floor push button 2 times in
quick succession, each time a ring
tone sounds
press button shortly
... a ring tone at the front-door station
and a ring tone at the indoor station
sounds
1)
Repeat the steps, until all bell buttons are programmed
3
End
Power supply and control unit
press short LED is ON
Programming mode of the system is OFF
1) If a Progsperr tone sounds instead, a programming lock is set in the front-door station.
The programming lock can only be removed with the Service Device TCSK-01.
