7
11/2014
TCS TürControlSysteme AG
Geschwister-Scholl-Str. 7
39307 Genthin
Subject to technical changes.
Fon.: +49 (0) 3933 8799-10
Fax: +49 (0) 3933 8799-11
www.tcsag.de
PI FVK220x UK 2A
Wiring example
Commissioning
!
First install the system completely, then connect it to the power!
Install the devices of the system completely.
Observe that V1 and V2 must
not
be connected to the a-, b- or P-wire.
When connecting the video wires V1 (+) and V2 (-) the polarity must be observed.
Check the a-, b- and P-wire against each other on short-circuites.
Switch in the main powerl.
floor
push
button
floor
push
button
Set matching resistor when
the device is installed at the
end of a TCS:BUS video
strand.
