4
11/2012
TCS TürControlSysteme AG
TCS Hotline: +49 (0) 41 94 / 98 81 188
Subject to technical changes.
FAX: +49 (0) 41 94 / 98 81 29
Mail: [email protected]
PI_FBI4500-0100.doc 2A
Terms
6-wire operation
Standard operation mode for TCS video systems, where two separated ground
wires (b and M) are used.
5-wire special
operation
If there are only 5 wires available for the device, so that the M-wire cannot be
connected, a 5-wire special operation is possible.
PTZ camera
If a PTZ camera (Pan Tilt Zoom) has been installed, the image section shown
on the display can be changed by panning horizontally,
tilting vertically as well as by zooming in and out.
preferred position
Preferred camera setting. The position is stored in the camera and can be
configured in the PTZ camera interface via the configuration software con-
figo™ (as of version 1.7.x).
By specific actions at the TCS:BUS
®
(door call, control function) the positions
can be controlled.
On-Screen-Display
(OSD)
Dropdown menu which is displayed on the screen and can be activated by
pressing the menu or image button of the device.
Intended use
The PTZ camera interface FBI4500-0100 is a device to connect PTZ cameras of other
manufacterers to the TCS:BUS
®
video system.
The device is suited for surface-mount.
!
Using the PTZ camera interfaces is only useful in combination with a camera, which
can be controlled by the PTZ control commands.
To control the camera, a video indoor station with control keys (resp. navigation but-
tons) LEFT, RIGHT, UP, DOWN is necessary (e.g. series IMMx3x0, ecoos
™
IVW22xx, sky
™
IVW2221 or skyline
™
IVW3012).
Max. 16 devices and 16 cameras are permitted when using up to 5 video switches
at one TCS:BUS
®
.
