8
Let’s Get Started!
Installation & Assembly Instructions
Step 1:
Assemble and Attach the Exhaust Hose
• Extend both sides of the hose. (Fig. 1a)
• Screw on the hose inlet (Fig. 1b)
• Screw on the hose outlet (Fig. 1c)
• Attach the exhaust hose by sliding the hose inlet from the top down into the air
outlet grille. (Fig. 1d)
A
A
B
B
C
C
1a.
1b.
1c.
1d.
Vertical
window
Horizontal
window
Step 2:
Window Slider Kit Installation
Parts Needed:
A.
Panel (x2)
B.
Panel with one hole
C.
Screw or plastic pin
Assembly
1.
Slide Panel A into Panel B and and adjust to window width (use second Panel A if necessary).
When sizing the window width, be sure that the window kit assembly is
free from gaps when taking measurements. If necessary, cut Panel B down
to size. Cut on the side opposite the hole.
2.
Lock the screws into the holes that correspond with the width that your
window requires to ensure that there are no gaps.
3.
Use the provided foam seal to fill in any gaps.
A
A
B
B
C
C
1a.
1b.
1c.
1d.
Vertical
window
Horizontal
window
4.
Attach the hose outlet to the window slider kit.
A
A
B
B
C
C
1a.
1b.
1c.
1d.
Vertical
window
Horizontal
window
A
A
B
A
B
C
C
1a.
1b.
1c.
1d.
Vertical
window
Horizontal
window