TCL U65S9906, Руководство по обслуживанию

Страница: 19 / 51

Test and Alignment Specification for MT58 Series (v0 01)
160523
Page 14 of 26
Important: If measurements are performed on whatever else LED panel with Minolta CA210
, it’s required to
calibrate additional channel (ex: CH01) using relative following offsets (CH00 remains for CCFL panel):
+0.002
for “
x
”
and
+0.012
for
“
y
”.
Note
⑧: See WB list as follows for more details.

Cloning
Once a TV is well aligned and prepared (channels maps, volume, picture presets, …) , user can prepare golden
clone image that can be copied on demand to all further TV production lot of same TV. To access cloning function, you
can select
“
Factory menu

USB Clone && Update

All Clone/CH Clone/User data Clone
” , Scroll down to “
TV to
USB
” or “
USB to TV
” and press RCU “
OK/
►” key to process. 4 BIN images can created, overwritten or read on USB
stick (pen driv
e) depending on chosen template like following: “
database\applications\database\***.db
” . These files
need to be used strictly with MT58 SoC platform as depending on SW structure.
Other faster access methods via UART/IR commands are available on enclosed SIACP requirements (rev. v3.9).
2.4. High Pot. and Insulating Resistance Tests
At the end of the process, a “High Voltage” and an “Insulating Resistance” tests are required to fulfil Safety
Electrical requirements (CEI 65065).

High Voltage Withstanding requirements

Insulating Resistance requirements
-
“Voltage” 
3500 VAC
-
“Voltage” 
500 VDC
-
“Max Leakage Current” 
10 mA
-
“Threshold Min” 
4M
Ω
-
“Test Time” 
3 sec
-
“Test Time” 
2 sec
2.5. SHOP-END Test
At f
inal process stage, it’s necessary to perform “
Reset shop
” before any packing to leave Factory mode and
restore User default presets.
This function is accessible by selecting
“
Factory menu

Reset Shop
”, then pressing RCU “
OK/
►” key. Other
faster methods via UART/IR commands are available on enclosed SIACP requirements (rev. v5.4).
Note
⑨:
A password might be required in case of Parental Control function is locked, use default “
1234
” password or
“
0423
” super password to clean-up existing ones if forgotten.
END
Appendix
⑴ “How to upgrade SW FLASH using MTK tool”

Download boot bin
“ tcl_m1v1_eu_secure_emmcboot.bin” & blank upgrade main software“V8-T658T01.pkg”
from the software website.

Connect UART interface to suitable manufacturing TV input connector, upgrade boot bin first to blank IC.
1) Turn on your TV, then connect the Serial Interface to USB debug port.