-11-
Troubleshooting
Before resorting to maintenance service, please kindly check by yourself with the following chart.
Sound
There is no sound or
the sound is
distorted.
The audio cables aren't connected securely.
The volume is set to the minimum level.
The sound is switched off.
Connect the audio cables securely.
Turn up the volume.
Press [MUTE] on the remote control to
switch on the sound.
Press [PLAY/PAUSE].
The remote
control does not
function.
Symptom
Cause(s)
Remedy
No Power
There is no battery in the remote control.
The batteries are out of charge.
The remote control isn't pointed to the remote
sensor.
The remote control is out of its operating area.
The unit is shut down.
Install two AAA/1.5V batteries in it.
Replace the battery with new one.
Make sure that the remote control is
pointed to the remote control sensor.
Make sure the remote control is within
the operating area.
Switch off the unit and disconnect it from
the AC outlet. Then power on the unit again.
The AC power cord is not connected to the
power supply or is not connected to a power supply
securely.
Please check that the AC power cord
is connected securely.
Содержание TS3100
Страница 1: ...USER MANUAL TS3100 SOUND BAR SYSTEM ...
Страница 6: ...Panel 5 REAR PANEL 2 2 1 1 3 3 4 4 1 2 AUX IN 3 USB SLOT AC INPUT OPTICAL DIGITAL AUDIO INPUT 4 ...
Страница 14: ......