TCL TM14, Руководство пользователя

Страница: 10 / 13

RIGHT
LEFT
UP
MENU
DOWN
SOURCE
03
Features
Digital Super One Chip Function 4 Picture Modes
NTSC Comb Filter Wide Voltage Range
2 AV Inputs/LOOP Outputs, 1 S-VIDEO Input Smart Light Detection
Inner Temperature Detection
Specifications
390x478x325 (mm) 390x478x325
(mm)
504x512x420
(mm)
34cm
TM14 TM15 TM21
36cm 51cm
about 13kg about 15kg about 30kg
AV NTSC3.58, NTSC4.43, PAL
220V 50Hz
55W 55W 60W
Y: 1.0Vp-p; C: 0.7Vp-p
Video: 1.0Vp-p; Audio: 0.5VRMS
Receiving System
S-VIDEO Input
AV1&AV2 Input (BNC)
Power Consumption
Visible Diagonal Size
Net Weight
Dimensions(WxDxH)
Operating Voltage
Model No .
Battery Installation
Remove the battery compartment lid from the back of the remote, insert the 2 x 1.5V AAA batteries,
paying attention to the polarity, and then replace the cover.
Using the Remote Control
2. Wireless Remote: No need to connect it with the remote jacks. Point this wireless remote directly
toward the infra-red sensor on the unit. If there is an obstacle between the unit and the remote,
the remote signal may not be received.
1. Wire Remote: Connect one end of the attached remote cable to the jack on the remote and the
other end to the remote jack on the rear panel, then you can use this wire remote to adjust menu
controls.
Remote Control
Notes:
1. For better performance, once you find the operation is abnormal, please replace the batteries
and have a try again.
Remote Jack
MENU
/STANDBY
VOLUME UP
Transmitter
UP button
/DOWN button
Signal Source
(When you use a wire
remote, the operation
works only on the
connected monitor.)
Notes:
1. Press and hold the MENU/ button for 5 seconds to
turn the set into standby mode, where the indicator turns
red. Press MENU/ again to turn the set back to normal
working mode and the indicator becomes green.
2. Press the DOWN/SOURCE button to toggle among AV1,
AV2 and SVHS when there is no menu on the screen and
the browse function is deactivated.
3. Press VOLUME UP/DOWN to adjust the sound level. In menu mode,
VOLUME UP/DOWN works as RIGHT/LEFT button.
/RIGHT button
VOLUME DOWN
/LEFT button