Note: Each mode and relevant function will be further specified in following pages.
Remote controll
er
1
2
4
3
5
6
9
7
MODE button
FAN SPEED button
TEMP DOWN button
TIMER button
SLEEP button
To select the mode of operation
.
To switch the conditioner on and off.
To select the fan speed of auto/low/mid/high.
To set automatic switching-on/off
.
Decrease the temperature or time by 1 unit.
To activate the function SLEEP
.
TCL
Air Conditioner Service Manual
4.
OPERATION DETAILS
Remote Control
The remote controller is not presetting as Cooling Only Air Conditioner or Heat Pump by manufacturer.
Each time after the remote controller replace batteries or is energized, the arrowhead will flashes on the
front of
Heat
or
Cool
on LCD of the remote controller.
User can preset the remote controller type depending on the air conditioner type you have purchased as
follows:
Press any button when the arrowhead flashes on the front of
Cool
, Cooling Only is set.
Press any button when the arrowhead flashes on the front of
Heat
, Heat Pump is set.
If you don
t press any button within 10 seconds, the remote controller is preset as Heat Pump
automatically.
Note :
If the air conditioner you purchased is a Cooling Only one, but you preset the remote controller as Heat
Pump, it doesn
t bring any matter. But if the air conditioner you purchased is a Heat Pump one, and you
preset the remote controller as Cooling Only, then you CAN NOT preset the Heating operation with the
remote controller.
8
DISPLAY button
In cooling mode, press this button, the unit will give
the maximum cooling temperature with 16
In heating mode, press this button, the unit will give
the maximum heating temperature with 31
.
9
SWING button
10
To activate or deactivate of the movement of the
DEFLECTORS
.---
Side wind
12
HEALTH button
9
3
4
2
1
8
5
6
7
9
10
11
9
ON/OFF button
11
To
LED display (if present)
switch on/off the
12
TURBO button
To switch - on /off
HEALTHY funtion. It is a button
which controls the ionizer or plasma generator only
for inverter type.
ECO button
In cooling mode,press this button ,the temperature
will increase 2
on the base of setting temperature:
In heating mode, press this button, the temperature
will decrease 2
on the base of setting temperature.
13
SWING button
To activate or deactivate of the movement of the
DEFLECTORS
.---up and down
13
crease the temperature or time by 1 unit.
TEMP UP button
4
