TCL S615 Series, Руководство по эксплуатации

Страница: 8 / 19

8
Connecting to a Wireless Network
To connect to a wireless network
1. Ensure you have:
•
A router broadcasting a high-speed wireless signal
•
A high-speed internet connection
2. Use the Network & Internet menu
to configure the TV.
Network Connection
Your TV will require an internet connection to operate all functions. Data usage charges may apply.
Please refer to your Internet Service Provider (ISP) for additional information.
To access the internet, you must subscribe to high speed broadband internet service from your internet service
provider.
Your TV can be connected to your home network in two ways:
• Wired, using the RJ45 (LAN) connector on the back panel.
• Wireless, using the internal wireless or external wireless USB adapter and your home wireless network.
Note: The following instructions are just the usual ways to connect your TV to the wired or wireless network. The
connection method may be different depending on your actual network configuration. If you have any questions about
your home network, please refer to your ISP(Internet Service Provider).
Connecting to a wired Network
To connect to a wired network:
1. Ensure you have:
• An Ethernet cable long enough to reach your TV
• A router or modem with an available Ethernet port
• A high-speed internet connection
• An
Ethernet (LAN) port on the back of the TV
2. Connect your Ethernet cable to the router and to the
Ethernet port on the back of the TV.
3. Use the Network & Internet menu
to configure the TV.
Connections and Setup
Router
Modem Internet
LAN port
Modem Internet
Wireless router
Note: Please follow below steps to enter the Network menu.
1. Press
on the remote control to display the Smart TV homepage.
2. Press
▲
/
◄
/
►
to move the cursor to (Settings) on the right top of the screen and press OK to enter.
3. Press
▲
/
▼
to select Network & Internet, then press OK to enter the submenu and follow the on-screen guidance
to set up your network.