TCL RT2841 Series, Руководство по обслуживанию

Страница: 25 / 59

Test and Alignment Specification for RT2841 Series (v0.01).docx
Page 20 of 27
connected.

If connected, the Internet connection will display Connected. If not, If not it will display “Not Connected” and
you can try to enter your IP address manually to connect the network follow below steps

Select “ Advanced options ”

“ IP Settings ”

“ Static ” by pressing “ OK/ ►” key

Enter the “ IP address ”, “ Gateway ”, “ Network prefix length ”, “ DNS1 ”and “ DNS2 ”values. Use remote
control digital keys to enter number sand “◄/►” key to move from one to other field location

After setting all required inputs and save successful, to check the Internet connectivity again

Select
“
Menu

Network Settings

Ethernet
”
, then press “
OK/
►” key to display current connection
details, such as Internet connection status, IP address, MAC address etc..
Appendix
⑿
“How to upgrade Flash SW using Network”(not support now)
Appendix
⒀
“Factory Menu Description”
1-Factory Hotkey submenu
Item Sub-item Value Note
Hotkey OFF/ON
Enable Hotkey flag by pressing
“◄►” key to have possibility to
access
Factory menu with
“RETURN” key （ ） (default is
disabled)
Note :
Sita P mode submenu change to ON and reboot TV for the first time to enable the Factory Hotkey submenu.
2-Warm-Up Mode submenu
Item Sub-item Value Note
Burning
Mode
OFF/ON
Enable Burning mode by pressing
“◄►” key, then press “
EXIT
” key to
activate it
Press “
Menu ” key on local
keyboard to exit the Burning mode
Note:
Factory Hotkey submenu must be ON .
3-Reset Shop submenu
Item Sub-item Value Note
Reset
Shop
>
Press “ OK ►” key to remove
Factory presets (channel Maps,
bargraph context…) and restore
User settings. All adjustments are
not impacted!
Note:
Factory Hotkey submenu must be ON .
4-NVM Reset submenu
Item Sub-item Value Note
Reset ALL >
Press “ OK ►” key to default NVM