TCL-THOMSON Electronics R&D Center (Shen’Zhen Lab)
Chassis Name
NX56-LA
Serial No.
Issued on
2008-05-19
Page
Page 12 of 12
Updated on
Version
1.0
XDT 0
X-ray
detection
Don’t adjust, use default
AKB
1
Black current stabilization
Don’t adjust, use default
NBL
1
Black current loop application
Don’t adjust, use default
OSVE 0
Black current measuring lines in over
scan(for vertical zoom setting <1)
Don’t adjust, use default
CL
8
Set the cathode drive level
Don’t adjust, use default
CC-LINE 21
CC’s
line
Don’t adjust
HSYNC
DELAY
2 CC’s
position
Don’t adjust
5.
Enter P-Mode, press key “8” to select page “8”. Set the corresponding item to require
value. See below table 3.6.5 for detailed description.
Table 3.6.5: Producing parameter setup and option page “8”
OSD menu
Default Value
Description
Remark
BTSC
1
BTSC’s option
1: open
0:close
0=3 x 3
AV ALIGMENT
1
AV terminal align
1=4 x 3
SHVS ENABLE
1
S-Video terminal enable
YUV ENABLE
1
YUV terminal enable
NO COMMAND ENABLE
1
No operation within 2 hours
automatic standby enable
0=Disable
1=Enable
LANGUAGE2 1
LANGUAGE3 1
Note:
The “HEALTH FLAT” and “AC DISPLAY” options are valid only on model NX56-AP1
(example 29A41). The “LANGUAGE4” and “PIC PRESET” options are valid only on model
NX56-AP2 (example 21E26).
