TCL MC25P, Руководство по эксплуатации, Страница: 15 / 15

6.System Settings
Note: Product is subject to change without prior notice.
07
Press the MENU button to enter the SYSTEM menu. Press the UP/VGA button or DOWN/AV
button to make the selection and press the LEFT or RIGHT button to make the adjustments.
7.Geometrical Adjustments in HDTV and VGA mode
1. Enter the main menu in HDTV or VGA mode.
2. Press the UP/VGA button or DOWN/AV button to select the
GEOMETRY menu and press the RIGHT button to enter it.
3. Press the UP/VGA button or DOWN/AV button to make the
selection and press the LEFT or RIGHT button to make the
adjustments.
4. If you are not satisfied with your adjustments, press the
DOWN/AV button to select RESET. Press the RIGHT
button to confirm, then the set values are back to 0
and the geometrical sizes are back to the factory default.
GEO
V-WIDTH
GEO
V-SHIFT
H-WIDTH
H-SHIFT
RESET
0
0
0
0
RED
GRN
BLUE
CYAN
N
YELW.
C.TEMP NORMAL
N R
C. SYS . AUTO
PALETTE
LANG. ENG.
STANDARD
SCANMODE 100Hz
VIEW TIM
AV1
AV2
S-VHS
HDTV
VGA
10
ON
ON
ON
ON
ON
N R
PALETTE
LANG. ENG.
STANDARD
SCANMODE 100Hz
VIEW SWI ON
VIEW SET
Due to the geomagnetic effect, the picture will
slant horizontally. You can adjust it by this feature.
C. SYS.
ROTATE
Item
N R
C.TEMP
PALETTE
Explanation
COLOUR SYSTEM: AUTO/N443/N358/PAL
NORMAL/WARM/COLD
STANDARD/STRONG/OFF
SCANMODE
Enter the submenus to adjust the settings of RED,
GRN, BLUE, CYAN, N(MAGE), YELW. and CMPL.
If you want to reset the setting to the factory default,
select RESET and then press the LEFT or RIGHT
button.
100Hz/75Hz/P-75P/P-60P
LANG. ENGLISH/ CHINESE
ON/OFF
(When ON is set, the option of VIEW TIM appears.)
VIEW TIM
Enter the submenus to set VIEW TIME and the correct
input channel.
VIEW TIM
AV1
AV2
S-VHS
HDTV
VGA
ON/OFF (Selecting ON means you can view this
channel and vice versa. The followings are the
same.)
ON/OFF
ON/OFF
ON/OFF
ON/OFF
You can set the time from 1 to 100 seconds.
It will be the time span viewing each channel.
Item Explanation
Note: During the viewing, press MENU button to stop.
If you want to continue, enter the menu system again
and set VIEW SWI to ON.
VIEW SWI