TCL LED32D2910, Руководство по эксплуатации

Страница: 8 / 33

7
Getting Started
TV Buttons
If the batteries in your remote control are run down, you can use the buttons on your TV set. They have the
following functions:
For models with below buttons on the set:
For models with below buttons on the set:
or / ◄
TV mode In menus
P ▲
or / ►
P ▼
►
or
Features (Short press)
(Long press)
◄
Features (Long press)
OK
(Short press)
Features (Long press)
OK
(Short press)
For models with below buttons on the set: For models with only one button on the set:
TV mode In menus
Power on/Standby
P ▲
P ▼
►
◄
Features (Short press)
Source
(Press for 2s)
(Long press)
Features (Short press)
OK
(Press for 2s)
(Long press)
Note
:
Figures and illustrations are provided for reference only and may vary depending on the model.
Initial Setup
The first time you switch the set on, the First Time Setup wizard appears, which guides you through the initial setup
process.
First Time Setup
involves all the settings necessary to get your TV ready for use. Ensure that your TV is
connected to an antenna or an external device that inputs TV signal, and then follow all the settings in turn listed on
the First Time Setup wizard.
First Time Setup
OSD Language
Mode Setting
Country
Tuner Type
Auto Scan
LCN
Auto Channel Update
Move Adjust MENU: Return EXIT: Exit
Auto Scan
English
Home Mode
Germany
Antenna
DTV+ATV
On
Off
Press ▲ / ▼ to select each setting and then press ◄ / ► to set the value. After completing all the settings, select Auto
Scan at the bottom of the wizard and press OK to start the automatic search process. You can also select Exit to
skip the channel search process. But when you turn on the TV next time, the prompt on the screen will remind you to
do the channel scan first.
Note : If the channel search retrieved only the analogue channels it could be caused by poor broadcasting and
therefore is not covered by manufacturer warranty. Manufacturers cannot be held responsible for lack of or
poor broadcasting in some areas.
Note : The Store mode does not meet the requirements of the MEPS certification. It is recommended that you select
the Home mode.