TCL LCD32M61S3-MS19 страница 32 Скачать руководство пользователя

Страница: 32 / 72

TCL Multimedia R&D Center File number:

Power on

ON, it says that TV will turn on while power on. While

aging, please set as ON.

Shop init

Initial. Press left or right key to initial. While there is OK

display on the screen, finished initial. Please initial the TV

while it will out of plant.

IV.

Aging

While TV need aging, pleas enter factory mode, set the WARM UP STATUS in producting as ON,

then set power mode as ON in set up menu. If TV need standby aging, please set power mode as

STB.

Producing Items adjustment.

ADC correct

This chassis can ADC correct when input YPBPR or PC signal resource. Enter factory mode,

switch the source as YPBPR or PC, input 100% color bar signal, enter ADC ADJ item, choose

AUTOTUNE item, press right key on remote control to start auto correct, when screen display OK

7 seconds later, it shows that ADC correct success. Then exit menu.

Remark: Before white balance adjustment, must do ADC correct OK in YPBPR and PC signal

input.

White balance adjustment.

Normal, warm and cool three situations’s white balance color temperature value must obey the

enterprise standard. Before adjust the white balance, please confirm if finished ADC correct under

YPBPR and PC sources, in addition, the picture mode must be normal.

This chassis white balance adjustment must be adjusted in three signal sources.

(1)AV/TV/S-Video’s white balance adjust under AV signal source input. Signal should be

NTSC-M eight-grey bar signal.

(2)YPBPR and HDMI white balance adjust under YPBPR signal source input. Signal must be

16-grey bar signal.

(3)PC white balance adjustment must be under PC signal input. The signal should be 16 grey bar

signal.

Factory producing white balance adjustment according to the software interface agreement and

working guide, setting relevant offsets to operate.

If it need human adjustment, please enter factory menu adjust WB items.

3. leave factory setting.

Leave factory setting items have been listed in factory menu. Please set each character according

to customers requirement. Or obey the default value. Before TV leave factory, please do “SHOP

INIT DO”. Operate method is press left or right key on remote control to initial it. While OK

display on screen, it finished the initial. Then turn TV off just OK..

Содержание LCD32M61S3-MS19









































































Результаты поиска

Содержание LCD32M61S3-MS19

Отзывы:

Похожие инструкции для LCD32M61S3-MS19

Бренды по названию

Популярные бренды

TCL LCD32M61S3-MS19, Руководство по обслуживанию

Результаты поиска

Содержание LCD32M61S3-MS19

Отзывы:

Похожие инструкции для LCD32M61S3-MS19

Бренды по названию

Популярные бренды