TCL L65P8M Series, Руководство по обслуживанию

Страница: 17 / 70

Test and Alignment Specification for RT2851 Series (v0.01).docx
Page 10 of 31
For such, specific DID (40 bytes) needs to be paired and overwritten into memory for internal client encryption.
All DID and MAC codes have to be download from portal local service via suitable factory workstation LAN system.
Then during production lot, it’s necessary to send/write all those codes to each TV.
DID codes can only be set using UART commands described above on enclosed SIACP requirements (rev. v8.31).
- Writing Device ID command < 0xB2 >, Data length < 32 >, Data type < ASCII > (see below command example from
above DID code)
<
AA 25 B2 42 45 34 46 32 35 35 42 42 44 31 30 36 42 43 38 46 38 30 36 41 45 34 35 36 33 35 30 44 39 31 46 48
93 >

LAN Test
A rough LAN test can be done by connecting DHCP server to TV’s RJ45 and check that IP, subnet mask, DNS, …
addresses are visible on “
Settings

Network

IP settings(Ethernet) ”.
More in-depth test can be performed faster using suitable UART/IR commands following SIACP requirements. SW
will internally manage Network ID (NID) flag controlling all MAC/DID/UID integrity to facilitate PA screening further.
See Appendix
⑾
“ Network Connection Setup ”
See Appendix
⑿
“ How to upgrade Flash SW using Network ”
Note
③:
It’s not necessary to check video and audio from DLNA server.
2. Product Assembly (PA): Test & Alignment
2.1.Factory Menu&
Main Menu\

How to Enable Factory hotkey
Follow the below steps to pop-up the Factory menu in case of “ Factory hotkey ” is disabled:
Enable Factory hotkey method:
Method one:
- Press RCU “
MENU ” key to display main menu
- Select “Settings

Picture

Advanced setting

Contrast”, Scroll down to “ Contrast ” item
- Press the subsequence RCU keys “
9
”, “
7
”, “
3
” and “
5
”