11
Clean channel list:
allows you to remove all the
searched channel from the channel list.
1. Select
Channel install >
Clean channel list
, press
OK
/► to enter.
2. Press ◄/► to select
OK
, then press
OK
to confirm
to clean the channel list.
Input settings:
you can configure your TV according to
the equipment you connect to it.
1. Select
Setup > Input settings
.
2. Press
OK
/►
to enter
Input settings
.
3. Press ▲/▼
to select a connector your equipment is
connected to.
4. Press◄/► to select the type of apparatus attached to
this connector.
5. Press
Menu
to return to the
Setup
menu. After
configuring, the selected source label will be
displayed after the name of the related connector in
the source list when pressing
Source
on the remote
control or
OK
on the TV set.
Diagnostic (on digital TV channels)
1. Select
Setup > Diagnostic
.
2. Press
OK
/► to display some signal information
on current digital channel, such as signal strength,
Freq.(KHz), etc..
Reset shop:
allows you to reset the TV to factory default
settings.
1. Select
Setup
, then press
OK
to confirm.
2. Select
Reset shop
and press
OK
/► to enter.
3. Use the digit buttons to enter the password to enter.
4. Press ◄/► to select
OK,
then press
OK
to confirm.
5. The Initial setup menu appears. Follow the related
Instructions.
Menu Operation
Chapter 4
Advanced Functions
View TV using the 3D function
WARNING:
• Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea and
headaches. If you experience any such symptom,
stop viewing 3D TV, remove your 3D glasses and
rest.
• Watching 3D images too closely or for a long
period of time may harm your eyesight.
• A responsible adult should frequently check on
children who are using the 3D function.
• Do not use the 3D glasses for any other purpose
than viewing 3D images on a 3D TV.
• Do not use the 3D function or 3D glasses while
walking or moving around, otherwise it may result
in injuries due to running into objects, tripping, and/
or falling.
Press
Menu
and select
Picture > 3D
, then press
OK
/►
to enter.
3D Mode:
Wear the 3D glasses first, then press
◄/► to select the right 3D input format among
Top
and
Bottom, Side-by-Side, 2D-to-3D
,
Line interleave
and
Frame sequential
for the playing 3D video.
L-R Switch:
select
On
or
Off
to adjust the 3D image
for the left and right eyes with better visibility.
Depth of Field:
adjust the stereoscopic effect of the
3D image converted from 2D image.
3D-to-2D:
select Left or Right to display the
image for the left or right eye only. This function is
deactivated when 3D Mode is set to 2D-to-3D or Off.
Press
Exit
to close the menu.
Notes:
- Some 3D modes may not be available depending
on the format of the image source.
- Some Picture functions are disabled in 3D mode.
- 3D glasses from other manufacturers may not be
supported.
- If there is an obstacle between the TV and the 3D
glasses, the 3D image may not display properly.
Setup your favourite channels
You can create a list of up to seven of your favourite TV
channels.
1. Press
LIST
.
2. Press the yellow button to enter
Channel list
selection. Press ▲/▼ to select the favorite list you
want to set up your favorite channels. Then press
OK
to enter the selected list.
3. Press the blue button to start to edit your favorite list.
Press ▲/▼ to scroll through the channel list and
press
OK
to select or unselect it.
4. Repeat this procedure to setup other favorite channels.
5. Press
LIST/Exit
to exit.
