Factory Alignment Specification
TestAlignmentSpecification for MT62B-LA.doc (Page 10 of 11)
Appendix
n
“How to download MCU SW”
Prepare WT_MCU_ISP SW tool for update.
1. Connect the PC to the chassis using MCU updating tool on P6.
2. Power on the chassis.
3. Start “Weltrend MCU ISP.exe” and download the MCU SW. (please see file
Visio-ISPToolGuide_ver090.pdf)
Appendix
o
“How to download FLASH SW”
Prepare MTK SW tool for update.
1. Connect the PC to the chassis using serial device on P9.
2. Power on the chassis.
3. Start “MTKTOOL.exe”, and set the parameters as below picture:
4. Press “Browse” button to select the corresponding SW bin file to upload.
5. Press “Upgrade” button to start downloading the SW and wait the guage displayed “100%”
that means the SW has been successfully downloaded.
6. Once the SW is downloaded, switch-off/on the chassis board and wait few seconds for
system NVM update.
Appendix
p
CVBS/RGB/CMP/VGA Relative Matrix Offsets and WARM/COOL Relative
Matrix Offsets
These offsets should be done in the production by AOE.