TCL L26E9AD Скачать руководство пользователя страница 4

Introduction

3

Chapter 1

Precautions

Product

Read all of the instructions before operating the set. Keep these 
instructions well for future use.

Do not block or cover the ventilation openings on the back cover. 

Do not push objects of any kind into this unit through the cabinet 
slots as they could touch the current carrying parts or short-circuit 
parts, resulting in fire, electric shock, or damage to the unit.

as this may cause damage

Do not touch the screen surface with fingers as this may scratch 
or mar the LCD screen.

Do not impact the LCD screen with hard pressure as this may 
damage the LCD screen severely.

The appliance is not intended for use by young children or infirm 
persons without supervision. Young children should be supervised
to ensure that they do not play with the appliance.

Do not attempt to open the cabinet 

There are no parts inside you can service by yourself. Refer all 
servicing to qualified personnel.

Cleaning

Dust the set by wiping the screen and the cabinet with a soft, clean 
cloth or some special liquid cleaner.

Do not apply excessive force to the screen when cleaning.

Do not use water or other chemical cleaners to clean the screen as 
this may damage the surface of the LCD screen.

Unplug the set under the following conditions:

- If the set will not be used for a long period of time.

- If the power cord or the power outlet/plug is damaged.

- Follow the instructions to install and adjust the product. Adjust 
  those controls that are covered in these operating instructions 
  as improper adjustment of other controls may result in damage. If 
  this happens, unplug the set and refer to the service personnel.

- If the set is subject to impact or has been dropped to have the 
  cabinet damaged.

Power and Plug

Do not allow anything to rest on or roll over the power cord and 
the signal cable.

Protect the power cord and the signal cable from being trampled.

Do not overload the power cord or the power outlet.

Do not expose the power cord and the signal cable to moisture. 

Power Cord and Signal Cable

Do not place the set on an unstable cart, stand, or table.

Place the set on a place that allows good ventilation.

Do not use the set near damp, and cold areas. Protect the set 
from overheating.

Keep the set away from direct sunlight.

The Set shall not be exposed to dripping or splashing and no 
objects filled with liquids, such as vases, shall be placed on the
set.

Do not use the set in dusty environments.

Use Environment

Hanging the TV Set on the Wall

Warning: This operation requires two people.

To ensure a safe installation, observe the following safety notes:

    Check that the wall can support the weight of the TV set and wall 
    mount assembly.

    Follow the mounting instructions provided with the wall mount.

    The TV set must be installed on a vertical wall.

    Make sure to use only screws suitable for the material of the wall.

    Make sure that the TV set cables are placed so that there is not 
    danger of tripping over them.

All other safety instructions about our TV sets are also applicable 
here.

Important Information

Using cabinets or stands recommended by the manufacturer of the
television.

Only using furniture that can safely support the television.

Ensuring the television is not overhanging the edge of the 
supporting furniture.

Not placing the television on tall furniture (for example, cupboards 
or bookcases) without anchoring both the furniture and the 
television to a suitable support.

Not standing the televisions on cloth or other materials placed
between the television and supporting furniture.

Educating children about the dangers of climbing on furniture to
reach the television or its controls.

If a television is not positioned in a sufficiently stable location, it can 
be potentially hazardous due to falling. Many injuries, particularly to 
children, can be avoided by taking simple precautions such as:

Graphics contained within this publication are presentation only.

Note:

Содержание L26E9AD

















Отзывы: