TCL HH130V1, Руководство пользователя

Страница: 12 / 26

12
Getting started with your device
3.5 Access wireless network
3.5.1 Access.wireless.network.via.Wi-Fi.
To establish a wireless network connection:
Step.1:. Enable Wi-Fi on your device.
When the Wi-Fi indicator is solid blue, Wi-Fi is enabled.
Step.2:. Record the Wi-Fi name or SSID and Wi-Fi password.
The default SSID and Wi-Fi password can be found on the bottom label of your device.
To prevent unauthorised parties from accessing your Wi-Fi network, it is recommended that
you change the SSID and Wi-Fi password from time to time. For more information, refer to “5.
Settings”.
Step.3: Set up a Wi-Fi connection.
y
Set up a Wi-Fi connection manually:
1) Scan for wireless networks from your Wi-Fi enabled client.
2) Connect to the network name that matches the SSID found on the device label.
3) When prompted for a password, enter the Wi-Fi password found on the device label (this
is case sensitive). Your client will notify you when it is connected.
y
Set up a Wi-Fi connection through WPS. For details, see “3.4.2 Connect in WPS mode”.
3.5.2 Connect.in.WPS.mode
Your client must support WPS. There are 3 ways to set up a WPS connection.
Option.1:. WPS button
1) Press and hold the WPS button for 3 seconds. The Wi-Fi indicator will begin to flash blue.
2) Enable WPS on your personal device within 2 minutes.
3) Your personal device should then be connected to your device wirelessly.
Option.2:. via Start.WPS button in Web UI
1) Open the WPS page on your Web UI.
2)
Go to Settings. > Wi-Fi > WPS.
3) Click on Start.WPS .
4) Enable WPS on your personal device within 2 minutes.
5) Your personal device should then be connected to your device wirelessly.
Option.3: WPS PIN code
1) Open the WPS page on your Web UI.
2)
Go to .Settings > Wi-Fi > WPS .
3) Switch on Router's PIN .
4) Enter the PIN code on your personal device.