Air Conditioner Service Manual
22
Duct
OUTDOOR UNIT
⚫
Do not install the outdoor unit near sources of
heat, steam or flammable gas.
⚫
Do not install the unit in too windy or dusty
places.
⚫
Do not install the unit where people often
pass. Select a place where the air discharge
and operating sound level will not disturb the
neighbours.
⚫
Avoid installing the unit where it will be exposed
to direct sunlight (other wise use a protection, if
necessary, that should not interfere with the air
flow).
⚫
Leave the spaces as shown in the picture for
⚫
The air to circulate freely.
⚫
Install the outdoor unit in a safe and solid place.
⚫
If the outdoor unit is subject to vibration, place
rubber gaskets onto the feet of the unit.
Minimum space to be left (mm) showing in the
picture.
To install, proceed as follows:
7.2.1
Installation of the mounting plate.
Wall split type:
• By using a level, put the mounting plate in a
perfect square position vertically and horizontally.
• Drill 32mm deep holes in the wall to fix the plate.
• Insert the plastic anchors into the hole.
• Fix the mounting plate by using the provided
tapping screws.
• Check that the mounting plate is correctly fixed.
Note: The shape of the mounting plate may be
different from the one above, but installation
method is similar.
Cassette and Duct type:
Wooden construction
Put the square timber over the roof beam, then install the
hanging screw bolts.
Ti mber ove r the b eam
Ro o f b eam
Ha ngi ng Screw
Ce ili ng
B ol t
For finished concrete bricks
Install the hanging hook with expansible bolt into the
concrete deep to 45~50mm to prevent loose.
Wall
material
Flammable
material
Fire-proof or
nonflammable
materials
Fire-proof
structure
B
Above 5cm
Above 5cm
Above 5cm
C
Above 100cm
Above 100cm
-
300mm
500m
m
2000
mm
300
mm
5
0
0
mm
Air outlet side
1
0
0m
m
Canvas tunnel
00