background image

3

Introduction

Chapter 1

Precautions

Read all of the instructions before operating the set. 

Keep these instructions well for future use.

Warning

Never place a television set in an unstable location. A 

television set may fall, causing serious personal injury 

or death. Many injuries, particularly to children, can be 

avoided by taking simple precautions such as:

 

-

Using cabinets or stands recommended by the 

manufacturer of the television set.

 

-

Only using furniture that can safely support the 

television set.

 

-

Ensuring the television set is not overhanging the 

edge of the supporting furniture.

 

-

Not placing the television set on tall furniture 

(for example, cupboards or bookcases)

 

without 

anchoring both the furniture and the television set to 

a suitable support.

 

-

Not placing the television set on cloth or other 

materials that may be located between the television 

set and supporting furniture.

 

-

Educating children about the dangers of climbing on 

furniture to reach the television set or its controls.

If your existing television set is being retained and 

relocated, the same considerations as above should be 

applied.

Product

• 

Do not block or cover the ventilation openings on the 

back cover. 

• 

Do not push objects of any kind into this unit through 

the cabinet slots as they could touch the current 

carrying parts or short-circuit parts, resulting in fire, 

electric shock, or damage to the unit.

• 

Do not attempt to open the cabinet as this may cause 

damage. There are no parts inside you can service by 

yourself. Refer all servicing to qualified personnel.

•  Do not touch the screen surface with fingers as this 

may scratch or mar the TV screen.

• 

Do not impact the TV screen with hard pressure as 

this may damage the TV screen severely.

Power and Plug

• 

Unplug the set under the following conditions:

 

-

If the set will not be used for a long period of time.

 

-

If the power cord or the power outlet/plug is 

damaged.

 

-

Follow the instructions to install and adjust the 

product. Adjust those controls that are covered in 

these operating instructions as improper adjustment 

of other controls may result in damage. If this 

happens, unplug the set and refer to the service 

personnel.

 

-

If the set is subject to impact or has been dropped 

and the cabinet has been damaged.

• 

Where the mains plug or an appliance coupler is used 

as disconnect device, the disconnect device shall 

remain readily operable.

(*Where an all-pole mains switch is used as the 

disconnect device, the switch shall remain readily 

operable.)

Power Cord and Signal Cable

• 

Do not allow anything to rest on or roll over the power 

cord and the signal cable.

• 

Protect the power cord and the signal cable from 

being trampled.

• 

Do not overload the power cord or the power outlet.

• 

Do not expose the power cord and the signal cable to 

moisture. 

Use Environment

• 

Do not place the set on an unstable cart, stand, or 

table.

• 

Place the set on a place that allows good ventilation.

• 

Do not use the set near damp, and cold areas. 

• 

Do not expose the set to excessive heat such as direct 

sunlight, fire, or the like and no naked flame sources, 

such as lighted candles, should be placed on the 

apparatus.

• 

Do not expose the set to dripping or splashing and 

no objects filled with liquids, such as vases, shall be 

placed on the apparatus.

• 

Do not use the set in dusty environments.

• 

Operating Temperature: 5°C

 

to 35°C (41°F to 95°F)

Operating Humidity: 20% to 80%, non-condensing
Storage Temperature: -15°C to 45°C (5°F to 113°F)
Storage Humidity: 10% to 90%, non-condensing

Cleaning

• 

Dust the set by wiping the screen and the cabinet with 

a soft, clean cloth or some special liquid cleaner.

• 

Do not apply excessive force to the screen when 

cleaning.

• 

Do not use water or other chemical cleaner to clean 

the screen as this may damage the surface of the TV 

screen.

Hanging the TV Set on the Wall

Warning

This operation requires two people.

To ensure a safe installation, observe the following 

safety notes:

• 

Check that the wall can support the weight of the TV 

set and wall mount assembly.

• 

 Follow the mounting instructions provided with the 

wall mount.

• 

The TV set must be installed on a vertical wall.

• 

Make sure to use only screws suitable for the material 

of the wall.

• 

Make sure that the TV set cables are placed so that 

there is no danger of tripping over them.

All other safety instructions about our TV sets are 

also applicable here. (

Note

Certain TV model is not 

designed to be mounted to the wall.

)

Содержание D3000 Series
















Отзывы: