7
、
Replacing the filter
Please follow the steps below to replace the filters properly when a replacement for the
pre-filter or the HEPA activated carbon filter is needed.
Note:
•
The activated carbon filter and HEPA filter cannot be washed with water or cleaned
with a vacuum cleaner.
•
Make sure you assemble the filters in the following order: HEPA activated carbon
filter, pre-filter.
•
Make sure that the filter components are installed in the correct direction in the
appliance.
1. Please switch off the purifier and unplug it
from the power supply.
2. Place your fingers in the groove on both sides
above the filter cover and gently pull out the
upper part of the cover towards you. Then lift
the cover upwards.
3. Remove all filters inside the purifier.
