TCL Alcatel FLASH2 PLUS, Руководство по ремонту

Страница: 8 / 59

L2 Repair Document
TCL
Communication Ltd.
Rev.
FL02 Level 2 Repair Document
Page
1.0 8/59
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
4) Enter the phone code if necessary.
5) If power on, test step by step with the auto test code:
Press *#2886# in dial screen and then you will see the interface displaying the SW version. Select
“Auto” to start the auto test, or select “MANU” to do the MMI test manually.
If one of the tests failed during “Auto” test mode, it will show “Failed: XXX”, press “Next” to go on test
and press “END” to power off.

Traceability
I. You can get some information such as IMEI, CU-REF, PTH, Date Code, etc.
II. Press “Pass” to continue.

Touch Panel1
I. “Please draw on the yellow area” according to instructions;
II. Press “Pass” to continue.

Touch Panel2
I. “Please draw on the yellow area” according to instructions;
II. Press “Pass” to continue.

LCD MIRE
I. You will see the LCD display three colors: RED, GREEN and BLUE if it
functions well;
II. Press “Pass” to continue;