TCL 55C815, Руководство по эксплуатации

Страница: 10 / 44

9
Getting Started
TV Buttons
- Power button
If the batteries in your remote control are run down, you can use the button(s) on your TV set.
There is only one button on the TV set. It may work just as Power on/Standby button, or as a multi-function
controller.
You can turn on the TV by pressing the button at the bottom left of the TV back case.
While the TV is on, press the button to display the multi-function menu. More information about how to use the
multi-function menu, please refer to the figure below.
• Press to move the highlight to the next function selection
•
Press and hold the button for more than 2 seconds to confirm your selection.
Note:
You can follow the on-screen guide to operate.
Figures and illustrations are provided for reference only and may vary depending on the model.
- MIC button
ON
OFF
The MIC button is located next to the power button. If you want to use the feature of hands-free TV voice control,
turn on this switch( not available for some models ).
Initial Setup
The first time you switch the set on, the
Welcome wizard
appears, which guides you through the initial setup
process. Follow the on-screen instructions to finish the initial setup process such as selecting the language,
connecting to the network, and more. During each step, either make a choice or skip the step. If you skip a step,
you can perform the setup later from the settings menu.