17
DNS
values. Use the numeric buttons to enter
numbers and the
▲
/
▼
/
◄
/
►
buttons to move
from one entry field to another.
- Once
IP setting
is completed, press
▲
/
▼
/
◄
/
►
to
select
OK
and press
OK
to confirm. The set will try
to connect to the network and inform you about the
result. Press to return to the
Network
menu.
6.
If you want to check the information on current
connection, such as
Interface
,
Address type
,
IP
address
, etc., press
▲
/
▼
to select
Information
and press
OK/
►
to enter. Press to return to the
Network
menu.
7.
If you want to check the Internet connectivity, press
▲
/
▼
to select
Connection test
and press
OK/►.
Connecting to a wireless network
Your TV is equipped to be connected to your home
network wirelessly. To do that you need a wireless
router or modem.
1.
Press or
on the remote control, select
Settings > Network > Internet connection
and
press
OK/►
to enter.
2.
Press
▲
/
▼
to select
On
and press
OK
to confirm.
3.
Press
▲
/
▼
to select
Interface
and press
OK/►
to
enter.
4.
Press
▲
/
▼
to select
Wireless
and press
OK
to
confirm.
5.
Press
▲
/
▼
to select
Wireless settings
and press
OK/►
to enter. You can set the wireless network
connection in 3 ways:
-
a) Scan
•
Press
▲
/
▼
to select
Scan
and press
OK/
►
to
enter. The TV will search all access points within
range. Access points found by the TV will be
displayed.
•
Press
▲
/
▼
to select an available access point,
then press
OK/
►
to connect.
•
Press to return to the
Wireless settings
menu.
Note: If you select a protected access point, you will
have to enter the corresponding password.
Press
OK
on the remote control to display the
virtual keyboard to enable you to enter the
password.
-
b) Manual
Press
▲
/
▼
to select
Manual
and press
OK/
►
to
enter. You will be prompted to enter the correct
SSID of an available wireless router to set up the
connection. Press to return to the
Wireless
settings
menu.
-
c) Auto
If your AP (Access Point) supports WPS (Wi-
Fi Protected Setup), you can connect to the
network via PIN (Personal Identification Number)
or PBC (Push Button Configuration). WPS will
automatically configure the SSID and WPA key in
either mode.
Press
▲
/
▼
to select
Auto
and press
OK/
►
to
enter.
•
PIN
: Select
PIN
and press
OK/
►
to enter.
Choose a random PIN code. Make sure this code
is installed on the AP. (For the procedures, refer
to your router manual.) Select
OK
and press
OK
to set up the connection.
•
PBC
: If your router has a PBC push button, select
PBC
and press
OK/
►
to enter. Press the PBC
push button on your router within 2 minutes before
you select
OK
and press
OK
again. Your TV
will automatically acquire all the network setting
values it needs and connect to your network.
•
Press to return to the
Wireless settings
menu.
- Press to return to the
Network
menu.
6.
If you want to check the information on current
connection, such as
Interface
,
Address type
,
IP
address
, etc., press
▲
/
▼
to select
Information
and press
OK/►
to enter. Press to return to the
Network
menu.
7.
If you want to check the Internet connectivity, press
▲
/
▼
to select
Connection test
and press
OK/►
.
DLNA (Share & See)
Note: This manual covers products with either
Share
& See
or
DLNA
function.
Share & See
is
DLNA-compatible.
Connecting to your PC
Make sure to set up a wired or wireless connection from
your TV to a router first. Then connect your PC to your
router either through a network cable or wirelessly. Also
make sure to select
Network > Internet connection
and
select
On
, and that your computer firewall won’t block
the connection.
Enabling DLNA function
Press or
on the remote control, select
Settings >
Network > DLNA
and press
OK/
►
to enter. Press
▲
/
▼
to select
On
and press
OK
to confirm.
Follow the steps
in turn specified hereafter, then you can enjoy recorded
videos, images and music saved on your PC.
Adding media from your PC for sharing
Install a DLNA media server on your PC. The simple
and familiar server you may install is Microsoft Windows
Media Player 11 and above. Follow the instructions
below to allow your TV to access the designated files on
your PC.
1.
Open the Microsoft Windows Media Player 11.
2.
Select
Library > Media sharing
.
3.
Check the checkbox
Share my media to
.
4.
Select the icon of the TV set connected to your PC.
5.
Select
Allow
to allow the TV set to access your PC,
and select
OK
to enable the access.
Note: Use the
Settings
button to customize your
desired settings.
6.
Select
Library > Add to Library
.
Menu Operation
