TCL 32D2900, Руководство по обслуживанию

Страница: 20 / 38

Factory Test & Alignment Specification For MS63EP1
和
EP2-LA Series (V1.0)
Page 12 of 16
The second method
：

To use this method, there should be SW in mainboard to ensure TV can display normally.

Copy the SW BIN image
“
V8-S463D01-LF1V0**.
bin”
into USB stick (pen drive) root path

Press RCU MENU

System

software upgrade

OK

By USB

TV display warning information, that means it is upgrading, almost 1.2minutes later, when
upgrade successful, TV should restart automatically.
Note
：
The Main Software contains Mboot Software.
Appendix

“How to change ProjectID with RCU”

Process following subsequence IR codes to change project ID: MENU+xxx (xxx:
Project ID, ex: 001)

Restart TV
Appendix

“
How to upgrade MAC Address

Upgrading MAC address need to use the tool in factory and through serial command, the
specific methods according to the operation of the factory guidance.
Appendix

“
Factory Menu Description
”
1- Factory hotkey submenu
Item Sub-item Value Note
Factory
hotkey
Off/On
OFF
：
hotkey is invalid
ON
：
hotkey(Return key) is availability
2-Warm-Up Mode submenu
Item Sub-item Value Note
Warm-UP
Mode
Off/On
Select panel On with left/right key, Press
“EXIT” key to enter the burning mode;
Press “Menu” key on keyboard to exit the
burning mode
3-ADC submenu
As SoC as built-in A/D self-
calibration mechanism, there’s not any ADC to perform.
4-White Balance submenu
Item Sub-item Value Note
White
Balance
Source HDMI,etc
Balance source are
：
HDMI, ATV, DTV, PAL, NTSC, CMP
Color Temp
Normal
/Warm/Cool
Warm and cool value is relative to Normal
one. Normal is the default Tone mode
R Gain 000..255
R White balance (-127..+128 for gain)