27
About half of the water in the tank is rinsed through the machine.
The machine will then pause for about 1 minute
. Then the second half of the
water in the tank is rinsed through the machine.
Afterwards, the machine will
automatically switch into standby mode
. The descaling process is completed.
For a long period of non-use
If you do not use the machine for a longer period of time, for example when you
go on holiday, we recommend cleaning the machine for hygienic reasons. Follow
the steps from the "Cleaning” chapter.
Remove the water from the piping system of the machine.
Prerequisite:
• The machine is switched on and ready for operation.
1. Place an empty container (with
a capacity of at least 8.4 US.fl.oz
(250 ml)) under the coffee spout.
Remove the drip bowl if neces-
sary.
2. Press and hold both the regular
coffee button and the on/off
switch (for approx. 5 seconds)
until 2 beeps sound.
3. Release the buttons.
The "Empty system"
symbol flashes.
4. Pull the water tank out of the
machine and pour away any
remaining water in the water tank.
The "Empty system"
symbol now lights up
permanently.
The pump transports the remaining water out of the pipes of the machine.
It stops automatically as soon as there is no more water inside. The residual water
runs into the container beneath the spout.
Afterwards, the machine will automatically switch into standby mode.
5. Reinsert the water tank in the
machine and push it down as far
as it will go.
When you wish to use the machine again at a later time, proceed as described in
the “Initial operation – prior to first use” chapter.
109547 en Kaffeevollautomat_USA_v4.indd 27
109547 en Kaffeevollautomat_USA_v4.indd 27
31.08.22 09:51
31.08.22 09:51
