9
Status
The status information and measurements on the Status page may provide helpful clues to
identify and troubleshoot technical issues.
In This Chapter
9.1
View status information
Status page: a snapshot with automatic page updating
9.1.1
Stream states
The Status tab provides information on the stream states of video and audio streams.
Stream state
Description
OK
There is nothing wrong with the stream. Note that if the video
signal is removed from the video input on the encoder side, the
Decoder rx state is still reported as OK, since the video transmitter
is sending a stream - that is, a No Video image - to the decoder.
Idle
The transmitter/receiver is not enabled.
Waiting
The transmitter/receiver has lost its stream connection.
Possible causes:
● An incorrect port number.
● The transmitter on the encoder side is not enabled.
● No FloodGuard packets have been received for more than three
seconds. For details on the FloodGuard flooding prevention
mechanism, see the note on FloodGuard in the Video chapter.
31
