2
From the PTZ driver list, select the protocol supported by the PTZ device you wish to
control.
3
Click Save.
You can now control the camera with the control panel on the Live Video page.
15.2
Upload/Remove PTZ drivers
To upload a PTZ driver
1
In the PTZ Driver Management section, click Browse.
2
In the File to Upload dialog box, browse to the folder containing the driver.
3
Select the appropriate file (
.txt
or
.js
extension), and then click Open.
The driver displays in the File text box.
4
Click the Add button.
The driver is added to the list of available drivers in the PTZ Driver Management and
Camera Settings sections.
To remove a PTZ driver
1
In the PTZ Driver Management section, select the driver you wish to remove.
2
Click the Del button.
15.3
Data Settings
PTZ > Data Settings
Item
Description
Bit rate
1200, 2400,
4800, 9600,
19200, 38400,
57600,
115200 bit/s.
The speed of the digital transmission - that is, the
amount of information transferred/processed per
unit of time.
Word length
(excluding parity)
5, 6, 7, 8.
Determines the number of bits that is transferred in
a single operation.
Stop bits
1, 2.
Indicate the end of a data character to enable the
receiver to resynchronise with the stream.
Parity mode
None, Even,
Odd, Mark ,
Space
Enables sending of an extra bit with each data
character for error detection purposes.
PTZ
119
