TCE EVO Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 20 / 26

TCE Group S.r.l. Installation, use and maintenance manual – Serie NEOS
20
INSTALLATION AND CONNECTION
The product has been developed, manufactured and tested to meet all specific standards (see the declaration of conformity), if
installed and connected in a proper manner.
All the products are tested and configured by the manufacturer before shipping and delivery to the customer.
If the installation, use and/or maintenance of the device are not carried out in a proper manner, anomalies may occur during
operational use, and safety problems may also occur. Inappropriate installation and maintenance will void the warranty terms.
WARNING
THE DEVICE CAN ONLY BE OPERATED AFTER IT HAS BEEN INSTALLED CORRECTLY.
Before installing, connecting and operating the device, completely remove any protection from dust or humidity and any
packaging material.
Preliminary checks
Check for any damage
Check that the various parts of the device do not show physical damage due to shocks, tears or abrasions.
Check in particular:
• That the cables are not damaged/ruined/cut
• That the device is not damaged/ruined/cut.
• That the power plug (if present) is not damaged or ruined
Damage Reporting Procedure
If any damage is found, interrupt the procedure in progress and report the nature of the damage to the manufacturer's
customer support office.
Installation
To install the product, proceed as follows:
1.
Remove it from the packaging, making sure to remove all protections (inserted in order to protect the device from dust
and humidity and/or anything else that may occur during transport)
2.
Proceed to a visual check of the integrity of the charger and all its connected parts
3. Proceed with the installation of the DC connector (ensuring compatibility with the battery)
Preparation
• Make sure the power and charging plugs are installed. If not, contact a specialized technician to install the properly sized
connectors for the device and the power supply network
• Make sure that the DC and AC charging cables are in perfect condition before proceeding with the installation
• Make sure that the mains socket into which the device will be connected is properly grounded and protected by adequate
safety measures
• Make sure that the device is suitable for the connected battery (check serial label)
• Make sure that the device is positioned in a place suitable for its purpose that does not lead to accidental fall and possible
damage.
• Avoid placing the device in areas with sparks and/or flames as the battery generates explosive gases during the charging
process
• Make sure the battery cells are in good condition and that there are no short circuits
• Make sure there are no objects on top of the battery cells before starting the charging cycle
• Make sure that ordinary maintenance of cleaning (every 6 months) has been carried out. Otherwise, proceed with
cleaning (with the charger not powered) to ensure optimal ventilation and heat dissipation
• It is recommended not to use and unplug the device during heavy thunderstorms