15
16
Driver Fatigue notification:
Set the fatigue driving reminder to turn on or off.After recording for 4
continuous hours, the recorder will prompt the driver to take a break from driving. The prompt
will be audio warning and flashing of icon on the LCD.
Note:
Icon flashing is not available if LCD is set to AUTO OFF.
Open light Notification :
Set the switch on headlight reminder On /Off. When set to On, the recorder
will prompt the driver to turn on the headlights when the camera detects that the environment is
dark. The prompt will be audio warning and flashing of icon on the LCD.
Note:
Icon flashing is not available if LCD is set to AUTO OFF.
G-sensor sensitivity :
Set the collision sensitivity of the gravity sensor to lock the video clips.
Off:
Do not lock any collision / event files
Low, Medium and High:
Adjust the Sensitivity of the G-sensor
Parking Monitoring:
Turn the Parking Mode On or OFF.
On:
During parking (Engine OFF), the recorder can wake up to record a 20 s clip when the G
sensor is triggered.
Off:
Parking recording is disabled.
Parking monitoring threshold:
User can set the sensitivity of the Parking mode G sensor.
Note:
Do not adjust until too sensitive, SD card will be full.
Restore Default Settings:
Restore all settings to original factory parameters
Power-off Delay:
Set the delay to switch off the recorder after Engine is switched off. (No delay,
10 seconds, 30 seconds or 1 minute)
LCD Auto Close :
Set if the LCD should always remain ON, or auto OFF after a certain period of
time.
OFF :
LCD always ON
10 seconds, 30 seconds and 1 minute :
LCD screen automatically turns off after the selected time.
Mute Button Press Audio :
Set Beep tone ON or OFF when the buttons is pressed.
Audio Button :
Turn the speaker on or off. After turning off, the unit is in the silent working state,
including the system warning and video playback.
Device information:
Check the firmware version of the model, the date of the firmware, and the
WIFI suffix of the machine.
WIFI Configuration:
Set the WIFI password.
Recording Quality:
Set the video quality (Bit rate) and recorded file size to Low, Medium or High.
Recording Length :
Set the length of each recorded video clip, 1 Min, 3 Mins or 5 Mins.
Record Audio When Recording :
Set to whether record audio or not in the video clips.
Overwrite:
Set ON to record over the older files (cyclic recording).
Capture is linked with Video:
Not applicable
Storage card information:
View the current memory card capacity.
Formatting Storage card :
Format the memory card. It is recommended to format the SD card
once a month to clear unwanted locked files.
