TCAM TMAS TMN-10, Руководство пользователя

Страница: 4 / 8

TMN-10 User Manual V1.1 (for Administrator) 4
4. Configuration
4.1 Subnode ID
Each subnode (TMN-10) that is connected to the TMAS Master must have a unique subnode ID.
The subnode ID is set by the DIP switch found on the TMN-10 board.
TMAS Master (TMN-5000) can support up to 16 different subnodes. Thus, the subnode addresses
range from binary 0000 (0 decimal) to 1111 (15 decimal)
Below are the possible subnode ID combinations on the DIP switch:
Note: A subnode will only read its ID from the DIP switch upon power up. Therefore, if you have
changed the subnode ID while the subnode is powered, perform a power reset so the changes
will take effect.
ON DIP
1 2 3 4
Switch
Most Significant
Bit (MSB)
Least Significant
Bit (LSB)
ON DIP
1 2 3 4
ON DIP
1 2 3 4
ON DIP
1 2 3 4
Subnode 0 Subnode 1 Subnode 2 Subnode 3 Subnode 4
ON DIP
1 2 3 4
ON DIP
1 2 3 4
ON DIP
1 2 3 4
ON DIP
1 2 3 4
ON DIP
1 2 3 4
Subnode 5 Subnode 6 Subnode 7 Subnode 8 Subnode 9
ON DIP
1 2 3 4
ON DIP
1 2 3 4
ON DIP
1 2 3 4
ON DIP
1 2 3 4
ON DIP
1 2 3 4
Subnode 10 Subnode 11 Subnode 12 Subnode 13 Subnode 14
ON DIP
1 2 3 4
ON DIP
1 2 3 4
ON DIP
1 2 3 4
Subnode 15
DIP Switch