T8000-I smart gateway user manual
Page 18 of 25
Valid Reading Range: Set valid reading range after processing of reading scale and
offset
Unit: Set a unit for reading display
Logging Interval: Set the frequency in minutes to log the readings
Noise Filter: Number of milliseconds channel state has to be in before being asserted
as a change of state
Assert Output When Trigger: Set either none or one output channel to be turn on
when input is asserted
Resend Count: Number of resending of alert sms if user did not acknowlegde the sms
received
Resend Interval: No of minutes before resending the next alert sms if user did not
acknowlegded the sms received
Click on
button when done with editing.
Click on
button to save all unsaved settings.
(4)
Door Access
Enable: Enable the channel to send out message when channel is triggered or
normalized
Message: User will receive defined SMS message when channel is triggered or
normalized
Check the users to receive alerts from selected channels
Note: Door access requires 2 Digital Input and 1 Digital Output.
Door Name: Set a door name
Enable Door: Check to enable door features
Door Lock: Select the digital output door lock is connected to
Output Type: Set if output is No Invert or Invert
