background image

4

Welcome to VoiceTone Harmony-M

Harmony-M was built for the singer who wants the
highest quality and most interesting live vocal production
possible. It puts a complete vocal production center
into your hands including harmony singers that follow
your singing and keyboard playing. It’s also highly useful
as a studio tool allowing the creation of background
harmony and even guide parts for singers.

Ease of use and convenience were of utmost
importance in the design of Harmony-M. This allows
singer/musicians to utilize all of its features quickly and
easily.

Harmony-M presents a selection of professionally-
authored patches. When out-of-the-box sounds aren't
enough, Harmony-M provides editing controls to
customize the presets to your preference.

Product information is updated regularly, so be sure to
check www.tc-helicon.com for the latest news.

Features:

o  Adds one or two harmony voices that follow your

MIDI keyboard playing 

o  Overdub-style vocal doubling feature adds richness

to your lead voice

o  High quality reverb and delay effects

o  Part A/B switch to allow instant selection of your

two favorite sounds

o  Quick and easy tweaking and storage of presets

o  XLR mic level input and output in stereo or mono

o  Clean, studio quality mic preamp with phantom

power

Introduction

Содержание VoiceTone Harmony-M





























Отзывы: