background image

 Appendix

VoiceLive 3 – Reference manual (2014-03-29) 119

System Maintenance/

Factory Reset

You can boot VoiceLive 3 in a special System 
Maintenance that will allow you to perform sev-
eral system maintenance functions, including a 
factory reset.

Entering System Maintenance Mode

–  Turn off your VoiceLive 3.
–  Unplug headphones (if attached)
–  Using a toothpick or a small wire (we recom-

mend a straightened paperclip), press the 
button that is inside the Headphone jack. The 
button is small and at the very end of the in-
side of the jack. You don’t need to use much 
force – so please be gentle. You will feel a 
small click when the button presses.

–  With the button held down, press the power 

switch on your VoiceLive 3.

–  Wait until you see the System Maintenance 

Screen.

  You should see the System Maintenance 

screen immediately. If you see the “normal” 
VoiceLive 3 screen (without the “System Main-
tenance” banner on top), you haven’t pushed 
the button inside the headphone jack correct-
ly. Try again.

–  Choose the desired option from the menu us-

ing the Control Knob.

Updating the firmware 

using a USB flash drive

If you cannot update the firmware of your Voice-
Live 3 using VoiceSupport software, you can 
perform a firmware update with a USB flash 
drive.

–  Format the USB flash drive to the FAT32 file 

system (see the manual of your computer/op-
erating system for instructions).

  Reformatting a USB flash drive will erase all 

data on it.

–  Copy the “.syx” file containing the firmware 

update to the USB flash drive.

–  Insert the USB flash drive into the USB host 

port on your VoiceLive 3.

–  Boot your VoiceLive 3 in System Maintenance 

as described in “Entering System Mainte-
nance Mode”.

–  Select the “Update from USB drive” option.

Содержание VOICELIVE 3 EXTREME
































































































































Отзывы: