TC-Helicon PERFORM-VG, Руководство пользователя, Страница: 14 / 16

14
PERFORM-VG User Manual
24. Default Top-Level Control
Out of the box, the Control Knob allows you to control the main output level.
This is particularly handy if you’re connected to a powered speaker directly and
would like to have control over your level at all times. However, there may be
times when you’d like the Control Knob to do something else, so we’ve covered
you there as well.
You may change the default behavior of the Control Knob during power-up.
Simply HOLD the indicated button during the power-up sequence.
There three options:
• Harmony Level – harmony button
• Headphone Level – headphone button
• Guitar Level – MIX button
• This control will only work if you have a guitar plugged in. If your guitar
is not plugged in, it will default back to Main Output Level until you plug
the instrument back in.
Please note:
These control options are “volatile” and will only be remembered during the
current power cycle. When you re-power, you must perform the operation again
to reset the control. This, like the Aux To Main Out control’s behavior, is to ensure
someone who gets stuck/lost with an unwanted top level control can easily reset
it back to Main Out Level (the default) by simply restarting the unit.
Additionally, if you have reassigned the top level control from Main Out Level
your last known main out level will be maintained in the background. If you
need to change your main out level, you’d need to re-power without holding
any buttons, set your level and then re-power again to reassign your top level
control to one of the other options. Generally, if you’re going to be using one of
the options regularly, just set your main out level to max (0dB) once and leave
it there permanently. This is because you’d be connected to a system with level
control somewhere else, like a mixer, which would take care of any changes you
might need.
25. Factory Reset
To reset the unit back to factory settings, press and hold the Vocal Echo and
Harmony buttons while powering up.
26. Support
If you’ve read through this manual and still need a little help, you can contact us
via our support portal and forums
http://support.tc-helicon.com