background image

6

PERFORM-VE User Manual

4.  Front Panel

Now that your Perform-VE is set up and connected to the devices of your 

choosing, we’re going to take a quick tour of the front panel, explaining 

what each of the buttons do without getting too deep in any details just yet. 

Don’t worry – we’ll go feature diving soon enough!

One Knob To Rule Them All

By default, Perform-VE’s Control Knob edits the mix between the MIDI Voices and 

your Lead Voice. It applies to all three presets and is not stored when Perform-VE 

is turned off.

The graphic above shows equal levels of MIDI and LEAD as displayed on the 

LED Ring. From here you can dial down the blue MIDI level by turning the knob 

counter-clockwise, or dial down the green LEAD level by turning the knob 

clockwise. Whichever level you turn down, the other one will stay at max volume.

Effects

Perform-VE makes some of the wildest and most complex sounds that TC-Helicon 

has ever made possible. There’s a lot to discover by simply pushing buttons and 

combining sounds, but we’ll give you an overview of the basics here, starting 

with the six effects buttons, as shown below:

Toggling the Effects

Quickly pressing and releasing any one of the FX buttons will toggle the 

associated effect on and off. The LED ring will switch to an alternate display mode 

while the button is down. There’s a reason for this momentary flash, and we’ll 

explain it now.

Real-time Control of Effect Parameters

Perform-VE was designed to allow instant access to 21 different effect 

parameters without navigating through menus.
Each effect button is labeled with light gray text in one or more corners of the 

button. For example, if you press “Level” in the top left corner of the Double 

button, and turn the Control Knob while it’s pressed, you’ll adjust the amount of 

doubling. Alternatively, if you hold Style in the bottom right corner of the Double 

button, once that button pulses, you’ll be able to change the doubling style when 

you turn the Control Knob. 
When a parameter edit is underway…

• 

The LED ring will display the currently selected parameter value, 

• 

The Control Knob will edit this parameter, ranging (clockwise) from min to 

max, and 

• 

The pressed FX button will pulse on and off. At this point you won’t need to 

keep holding it down to continue editing.

Pressing any button (including the button that is pulsing) will quit the edit mode. 

Styles and Mods

In addition to parameters like Level, Shift, Gender, Mode, Key, Div, Delay and 

Reverb, you’ll see that four of the effects have a Style parameter. Styles are 

essentially mini-presets for the effect in question. Changing any style will 

instantly update a number of deeper effect parameters that are not available 

for direct Control Knob editing. Style selections appear on the LED Ring as single 

color-coded LEDs.
Mods are related to the currently selected Style. They appear as levels on the LED 

Ring, colored to match the Style. You can think of each mod as custom ‘Tweak’ 

parameter matched to the Style in question.

4.1  The Set Button

Once a microphone and a MIDI keyboard are connected to your Perform-VE, 

it’s time to ensure that the audio and MIDI settings are correct. You achieve this 

with the 

SET 

button.

The SET button performs many functions in your Perform-VE. By itself, the SET 

button configures the mic input level and sets the MIDI channel and split-point 

used to control the notes, vocoder and sample features of your unit. 

Mic Gain Setting

The actual signal level coming from your microphone can vary depending on 

what type of microphone you have connected and how loudly you vocalize 

(speak/sing/shout/shriek) into it. The 

Auto-Gain

 procedure is the easiest way 

to ensure the microphone preamplifier level set within your Perform-VE is 

calibrated to match your mic and vocal technique, but you have the freedom to 

set the Mic Gain level manually if you prefer. 

Auto-Gain
Press and Hold

 the SET button to activate the Auto-Gain procedure and vocalize 

into the microphone at your typical loudest volume. After several seconds the SET 

button will flash red, indicating that the procedure is complete. 
You will see that the LED to the right of the SET button changes color when you 

vocalize into the microphone. 

LEAD Voice: Your voice. Enhanced 

and extremely altered, just how you 

want it!

MIDI Voices: Up to 8 MIDI Note 

controlled voices

generated by Perform-VE to 

accompany your LEAD Voice.

MIDI Voices are Harmony, Vocoder or 

VS Synthesis Voices.

Configures: Microphone Input Level,

MIDI Channel Select,

MIDI Split Point Select, 

& More…

Содержание PERFORM-VE

































Отзывы: