TC Electronic RESTORATION SUITE, Руководство пользователя

Страница: 9 / 31

WAVEFORM DISPLAY OPTIONS
Both the Declick and Descratch Plug-Ins have Waveform Options to customize how the
waveforms are displayed in the timeline of the Plug-In. Depending on the type of
material you are working on, you may find that you prefer one display to another, even
though no display method is better or more accurate than another.
TIP: When selecting one of the Waveform Display Options, this will be the default dis-
play behavior every time you open the plug-in.
NORMAL DISPLAY
Normal Display, the default display mode, is a high contrast scrolling waveform. A
clean waveform will appear black, while click and scratch artifacts will be indicated
with red lines. These lines reflect the amplitude of the artifact signal: large spikes
imposed on the waveform will indicate clicks, scratches and pops, while lower level
red lines—which in some cases appear to be a constant—will reflect crackle.
INTENSITY DISPLAY
Intensity Display is a low contrast scrolling waveform. A clean waveform will appear
gray, where higher amplitudes are displayed in darker shades of gray. Click and
scratch artifacts are displayed in much the same way; the intensity of the shade of
red will indicate the level of the artifact.
OUTLINE DISPLAY
Outline Display shows the outline of the waveform with red lines superimposed over
the waveform, indicating clicks and scratches. Again, these clicks reflect the
amplitude of the artifact signal: large spikes imposed on the waveform will indicate
clicks, scratches and pops, while lower level red lines will reflect crackle. This view
is best used with low-level signals.
RESTORATION SUITE
/
5
EE
NN
GG
LL
II
SS
HH