EE
NN
GG
LL
II
SS
HH
POWERCORE
/ 21
TYPE
(PLUG-IN TYPE)
No info
The plug-in license is not version 2.x., and therefore there is no info available. This
is typically the case if the plug-in has been installed with an earlier version of the
PowerCore software.
Not available
There is no info available because there is no PowerCore supporting the 2.x license
system available. This message appears when there are only PowerCore PCI/Elements
in the system.
Expired
The license has expired.
Removed
The license has been removed.
Beta
Beta version. This plug-in is a beta version and might not be fully functional.
Trial
This plug-in is a time limited trial version.The plug-in is fully functional until the end
of the trial period. Note: When the remaining trial period is above 4 days this is
indicated by: “> 4 days”
Bundled
This plug-in is bundled with one of the PowerCores in your system and is fully
functional.
Educational
Education version. Not for resale but fully functional.
NFR
Not for resale but fully functional.
Full
Full version - fully functional.
Load License
If you buy an optional plug-in, you will receive a license file. Use the Load License
button to store the license on your PowerCore card.
20 /
POWERCORE
EE
NN
GG
LL
II
SS
HH
STATUS
Enabled
The plug-in is activated.
19:59:59 – and counting
This counter shows the remaining time of the trial period of the plug-in.
Depending on the type of host application you are using, the time counts in slightly
different ways. With some host applications (such as Cubase) the counter is running
as soon as the plug-in is opened also when the song is in stop mode. With other
applications (such as ProTools), the counter is running only when a signal is passing
through the plug-in in play mode.
ACTION
Remove
It is possible to remove a license from you current PowerCore hardware and move the
license to another PowerCore unit or to sell the license should you wish to do so.
•
Click on the REMOVE button for the license you wish to remove.
•
Click OK to proceed.
•
Select at location where you want to save the file and click OK.
You have now removed the license from the PowerCore hardware. Next action is to
transfer the license back to your My Account.
•
Go to My Account via www.tcelectronic.com
•
Click Upload plug-in license.
•
Click BROWSE to locate your license file on your computer and click OK to
upload the license.
That's it. The license has now been successfully removed from your PowerCore and
uploaded to your My Account.
Load License to another PowerCore of you own
Should you wish to load the license back onto another PowerCore unit belonging to
you, click Download plug-in license and assign it to another one of your PowerCore
products.
Transfer License to another PowerCore user
In order to transfer a plug-in license to another PowerCore user, please contact the
TC Support Team and provide the following information:
-
Serial number and name of the product to be transferred.
-
TC My Account User ID / email address of the new user.
-
The registered PowerCore Authentication ID that the license should be transferred
to.
Содержание PowerCore
Страница 1: ...USER S MANUAL...