TC Electronic Intelligent Vocal Harmony Harmony4, Руководство пользователя, Страница: 9 / 21

The Voices Tab
The Voices Tab allows editing of settings you need most for each harmony
voice. The number of parameters differs depending on the harmony mode.
Level
Here you can mix the relative levels of each of the four voices. There is also an
"Off" value which will disable any voice. Note that turning all four voices on at
0dB (full) may produce overload. If this occurs, you can either reduce the input
level with the IN slider, or reduce the level of each voice.
Voicing (editable in Shift, Scale, and Chord Modes)
The Voicing parameter allows you to arrange the intervals of your four singers
above, and below the lead singer. Voicing works slightly differently in each
harmony mode.
In Shift Mode, the Voicing values range from -24 semitones to +24
semitones in a fixed, non-diatonic interval relative to the input melody.
In Scale Mode, the Voicing parameter specifies a diatonic interval relative
to the input. The range is -2 octaves to +2 octaves. For example, a setting
of +3rd will result in a harmony voice a third above the input voice, which
could be major, or minor depending on the current Key, and Scale settings.
In Chord Mode, Voicing determines a more general relation of the harmony
note to the input note. The harmony intervals always relate to the chord of
the incoming MIDI notes. A setting of "Up1" generally places the harmony
voice a third above the input voice.
In Notes , and Notes 4CH modes, the Voicing parameter is not shown, or
editable because intervals are the same as the incoming MIDI notes.
Pan
Each harmony voice can have its own stereo pan position. Spreading the
harmony voices within the stereo field can help de-couple the harmony voices
from the input voice, resulting in more natural sounding harmonies. Left = “-”,
Right = “+”
Gender
This parameter shifts the formants (often called the gender) of the harmony
voices. Use it to alter the character of the voice ranging from -50 (a big person
with a deep, resonant voice) to 0 (no change) to +50 (mice/alien sound).
Note Source, and Input Note (Only available in Scale Mode)
These parameters help you to create custom scales for times when the lead
voice melody, the harmony voice(s), and the musical accompaniment don’t
sound correct on certain notes. You can edit the individual harmony notes of all
four voices (if they are all enabled) for each input note.
Harmony4 page 9