TC Electronic G-Force, Руководство по обслуживанию, Страница: 7 / 20

______________________________________________________________________________________________________________________________________________________________________________
_________________
TC Electronic A/S G-Force Service manual page 7
Disassembly Procedure for Main Board
1. Turn Off Power and Disconnect Power Cord.
2. Loosen 5 screws, see fig. 1, and remove the top cover.
3. Disconnect front connector, J1, see fig. 2.
4. Remove screws at MT7, MT8, MT2 on the main board, see fig. 2.
5. Remove 5 nuts at the Jack connectors on the back panel, see fig. 3.
6. Remove screw at SPDIF in/out connector, see fig. 3.
7. Push the main board into the front profile a little to free the connectors from
the back panel, then lift out the board.
8. Desolder the seven wires from power supply.
Fig. 1: Screws at top lid
5 screws
Top view
Fig. 2: Screws and front connector at main board
MT7 MT8
J1
main board
Power
Supply
MT2
Top view
Fig. 3: Screws at back panel.
LISTED
5D83
PROFESSIONAL
AUDIO EQUIPMENT
MIDI / RS485
1 screw 2 nuts 2 nuts Jack nut