TC Electronic Finalizer, Руководство пользователя

Страница: 43 / 46

43
The Limiter
The limiter is placed after the Compressor. This means that if you
drive the Compressor too hard, you hit the limiter too hard. Give
the limiter some room to do its intended job, to hold down the
level once in a while. If you run the Compressor block output
levels too close to the Limiter “ceiling” your mix will sound
“squashed”. Conservative use of the Limiter, especially using the
softer ratios will keep the mix sounding natural. Using the soft
clipper with adequate “look-ahead” time will prevent any over-
shoot from the Finalizer.
The Crossover
A last thing to remember about the Finalizer’s dynamic section is
that the adjustable crossover frequencies are critical to the unit’s
proper operation. By changing the crossover setting to match the
program material you can change the sound dramatically, so you
should experiment with this feature and find the setting that
makes your mix sound best.
This tutorial is only as a brief description of a few possibilities in
the Finalizer. It does not replace the experience you can achieve
by working with the Finalizer.
Use and trust your ears