TC Electronic DVR250 NATIVE, Руководство пользователя

Страница: 10 / 20

10 DVR250 User Manual
4.7 Connection Status to the Hardware Unit
The TC Icon family all use the same method to show the connection status between
the plug-in and the hardware unit.
Connection status is indicated on the lower left side of the plug-in window.
Successful connection is indicated with a green chain icon. When using the
NATIVE version only, this chain icon will remain grey.
There are 3 conditions that will result in a “Not connected” status. If another
instance of the plug-in already exists on another track, the chain icon will
appear yellow with a yellow frame, and the text box will notify you where the
plug-in is currently active. Click the chain icon to connect the hardware unit to
the new plug-in location. The yellow icon may also appear while the connection
is being made between the DVR250 unit and the plug-in, accompanied by
“Connecting...” text.
If the hardware unit is disconnected from the computer, but the countdown has
not yet expired, a yellow chain icon without the yellow frame will appear.
See “Travel Period and Module Connection” section for details.
All other “Not connected” states are indicated by a red chain icon. This could
happen if the USB cable is disconnected, the DVR250 connection is disrupted,
or other issues.
To summarize the connection status possibilities:
Most DAWs o ffer the ability to move or drag plug-ins from one track/bus to
another, and DVR250 supports this as well.
Most DAWs also feature an on/off switch for plug-ins, accessible inside the
plug-in window and/or the track itself. Muting the plug-in will make the effect
inaudible, but will not shut down the connection to use the hardware unit.