TC Electronic DITTO LOOPER, Руководство пользователя

Страница: 6 / 12

4
Unpacking and setting up
Set…
Connect a 9V power supply with the following symbol to the DC
input socket of Ditto Looper:
Ditto Looper does not come with a power supply.
– Plug the power supply into a power outlet.
Please note that Ditto Looper has no battery compartment, and you
cannot connect a USB power supply to the USB port. A conventional
power supply is required for operating this product.
– Connect your instrument to the INPUT jack on the right side
of the pedal using a ¼” cable.
– Connect the OUTPUT jack on the left side of the pedal to
your amplifier.
Play!
Unpacking and setting up
Ready…
The Ditto Looper box should contain the following items:
– 1 Ditto Looper pedal
– 1 Ditto Looper quick guide
– 2 rubber feet for “non-velcro” pedal board mounting
– 1 TC Electronic sticker
– 1 leaflet about TC’s guitar FX product range.
Inspect all items for signs of transit damage. In the un-
likely event of transit damage, inform the carrier and
supplier.
If damage has occurred, keep all packaging as it can be used as
evidence of excessive handling force.