TC Electronic DBMAX - V 2 Скачать руководство пользователя страница 53

Страница: 53 / 58

NOTE

Certificate Of Conformity

TC Electronic A/S, Sindalsvej 34, 8240 Risskov, Denmark,

hereby declares on own responsibility that following product:

DBMAX Digital Broadcast Processor

- that is covered by this certificate and marked with CE-label

conforms with following standards:

EN 60065

Safety requirements for mains

operated Electronic and related

apparatus for household and similar

general use.

EN 55103-1

Product family standard for audio,

video, audio-visual and entertainment

lighting control apparatus for

professional use.

Part 1: Emission.

EN 55103-2

Product family standard for audio,

video, audio-visual and entertainment

lighting control apparatus for

professional use.

Part 2: Immunity.

With reference to regulations in following directives:

73/23/EEC, 89/336/EEC

Issued in Risskov, February 1th 1998

Anders Fauerskov

Managing Director

This equipment has been tested and found to comply with the

limits for a Class B Digital device, pursuant to part 15 of the

FCC rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for

help.

The user may find the following booklet, prepared by the Federal

Communications Commission, helpful:

"How to identify and Resolve Radio/TV interference Problems."

This booklet is available from the US. Government Printing

Office, Washington, DC 20402, Stock No. 004-000-0034-4.

Caution:

You are cautioned that any change or modifications not expressly

approved in this manual could void your authority to operate this

equipment.

For the customers in Canada:

This Class B Digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les

exigences du Réglement sur le matériel brouilleur du Canada.

Caution:

Danger of explosion if battery is incorrectly replaced. Replace

only with same or equivalent type recommended by the

manufacturer. Discard used batteries according to the

manufacturer's instructions.

All manuals and user guides at all-guides.com

Содержание DBMAX - V 2



























































Результаты поиска

Содержание DBMAX - V 2

Отзывы:

Похожие инструкции для DBMAX - V 2

Бренды по названию

Популярные бренды

TC Electronic DBMAX - V 2, Руководство пользователя

Результаты поиска

Содержание DBMAX - V 2

Отзывы:

Похожие инструкции для DBMAX - V 2

Бренды по названию

Популярные бренды