TC Electronic D-TWO, Руководство пользователя

Страница: 19 / 31

17
DELAY MODES
Additional Effects
To the Traditional Delay mode the effects
described below can be added:
Please see detailed description on 23-25.
Spatial:
Gives the Delay a wider feeling either by using
“left channel offset” or “Phase Reverse” of left,
right or both channels.
Filter:
Enables a High and a Low Cut filter in the
Feedback loop and in the actual Delay line.
Chorus:
Adds Chorus, to smooth the Delay repeats.
Dynamic:
A ducking function that reduces the Output
level of the Delay with a specified level when
the Input signal exceeds a certain Threshold.
PingPong:
The PingPong effect is not available in the
Traditional mode.
Straight Delay Mode
The Straight Delay mode, utilizes a feedback
strategy that gives you all the normal controls
of a Delay and on top of that, the ability to
control the exact number of repeats.
Instead of a traditional feedback loop, the
Straight mode uses a Multi-tap strategy.
Delay Line
Delay Taps
How to set up the Straight mode
Set the FEEDBACK # to anything between 1
and 10 by pressing and holding the
FEEDBACK/RHYTHM key while turning the
DELAY wheel. The D•TWO is now in the
Straight mode.
Max. Delay time
Due to the Multitap Delay strategy, the
maximum Delay time available is scaled with
the number of specified taps, e.g. if you have
10 repeats you will have 1000ms available on
each tap, while 5 repeats would give you
2000ms on each tap.
The maximum Delay time in total is:
In Stereo mode: 5 sec. Delay time.
In Mono mode: 10 sec. Delay time.
Stereo/Mono is selected in the SETUP menu.
The Parameters
The Straight Delay mode allows you to control
the exact number of repeats and additionally
offers the ability to add shuffle feel to the Delay
repeats.
Delay Time
Tap the DELAY/TAP key, or press the
DELAY/TAP key once and dial the DELAY
wheel to change the basic Delay time. The
maximum tap time pr. tap is 2000ms.
Feedback Level
Hit (one time only) the FEEDBACK/RHYTHM
key and use the DELAY wheel to change the
Decay of the repeats.
A 100% setting will leave every repeat at
maximum level.