QUICK GUIDE
3
DELAY/TAP key
This key has two functions.
- When the DELAY key LED is
lit, the DELAY wheel changes
the Delay time when dialed.
- When the key is tapped the
D•TWO measures the time
between the last two taps and
the Delay time is calculated
according to the selected
subdivision.
FEEDBACK/RHYTHM key
This key has three functions.
- When the LED is lit the
DELAY wheel is changing
the Feedback level or %.
- When the key is pressed and
held, the DELAY wheel changes
the number of repeats.
- Tap a rhythm pattern of up to
10 taps.
DELAY & FEEDBACK wheel
Sets the Delay time or Feedback
depending on what is selected.
SPATIAL key
Enables/disables the Spatial
function. Double click shortcuts to
the Spatial parameters.
Options are:
- Left channel /-200ms.
- Phase reverse any channel.
RECALL key
Selects the Recall menu.
SETUP key
Enters the Setup menu.
This is where all I/O and
global parameters are located.
STORE key
Selects the Store menu. Presets can
be stored in the User bank only.
Location is selected using the
CONTROL wheel. Operation is
confirmed using ENTER.
CURSOR UP/DOWN keys
Are used to move the cursor around
in the display.
CONTROL wheel
Is used to change values.
ENTER key
Confirms operations.
BYPASS key
Bypasses the unit. There are three
different Bypass modes.
1 Mix 0%: Signal is bypassed
directly to the Output.
2 Fx Input: Input bypass letting the
effects ring out.
3 Fx Output: Kills the effect but
keeps the direct signal level.
The Bypass mode is selected in
the Setup menu.
FILTER key
Enables/disables the Filter
functions. Double click shortcuts
to the Hi and Lo cut filter
parameters.
CHORUS key
Enables/disables the Chorus.
Double click shortcuts to the
Chorus parameters.
REVERSE key
Enables/disables the Reverse
Delay. Double click shortcuts to
the Reverse Delay parameters.
DYNAMIC key
Enables/disables the Dynamic
Delay. Double click shortcuts to
the Dynamic Delay parameters.
PING PONG key
Enables/disables the Ping pong
functions. Double click shortcuts
to the Ping Pong parameters.
EDIT key
Enters the general Edit list. This
is where all preset processing
parameters are located. Use the
CURSOR keys to select parame-
ters.
