Classic TCXII Phaser
15
TECHNICAL SPECIFICATIONS
14
Classic TCXII Phaser
Audio Connections
Input
- 1/4” connection for input signal. Connect your guitar here.
Output
- 1/4” connection for output. Connect the output to your amp.
Controls
Filters
- Select between 4, 8 or 12 filters. The higher amount of filters
used in a phaser, the smoother and thicker the sound.
LFO Speed
- Sets the general speed of the phasing effect.
Width
- Determines the width of the frequency sweep. A wider sweep
will make the turning points of the sweep less obvious.
Function
- From peak to notch. Use this control to select between and
set the intensity of either a negative (notch) or positive sweep (peak).
Peak is the phaser type most commonly used as a guitar effect. Notch
type is more subtle. As always - experiment and select the type that
suits you particular application best.
OPERATION
Connections
1/4 inch input jack, 1/4 inch output jack, DC jack
2mm (center is minus)
Power Supply
9-12 Vol DC or battery 9V Alkaline.
Effect Usage
20mA
Dimensions
100mm x 120mm x 50mm
Subject to change without notice
