BC210 / BC212 / BC410 – QUICK INSTALLATION GUIDE & OVERVIEW
Speaker Connections
The Speakon connectors can be used for
both input and link. Connect the amp output
to one of the connectors and link to a second
cabinet using the other connector.
Examples of Cabinet Combinations
2x210 speakers stacked
Plenty of low-end and power
with the precise, fast and
defined tone usually associated
with 10” speakers
410 + 212
Cool combination for full
low end, precision and
body
P/N: E60525011
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
Caution
•
You are cautioned that any change or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Service
•
There are no user-serviceable parts inside.
• All service must be performed by qualified personnel.
•
Read these instructions.
•
Keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Only use attachments/accessories
specified by the manufacturer.
IMPORTANT SAFETY INSTRUCTIONS
For the safety of your fellow musicians and your own, please address the stability of stacked cabinets and take proper
precautions to prevent the stack from being unstable or tipping over. Also notice that only two cabinets should be stacked
vertically.
Congratulations on the purchase of your BC210/BC212 or BC410 speaker cabinet!
Though connecting and setting up BC210/BC212/BC410 speaker cabinets is easy and straightforward, we recommend
reading this installation guide before usage. Enjoy!
1x212 + 2x210
For a combination
of precision, full
body and even more
low-end from the
2x12” cabinet
2x410
The Classic 8x10
from a combination of
2x410. Snappy and
crisp with plenty of
muscle
Specifications
- Eminence custom drivers
(210 = 2x10”, 212 = 2x12”
410 = 4x10”)
- Tweeter: Eminence
33 mm Titanium Diaphragm
- Power handling:
210 & 212: 250W
410: 500W
- 15 mm plywood
- Handcrafted wooden box
- Tolex covered
- Metal grill
- Rear ported
Dimensions & Weight
210: WxHxD - 462x662x380 mm
Weight - 19 kg / 41.6 lbs
212: WxHxD - 462x662x380 mm
Weight - 20 kg / 43.8 lbs
410: WxHxD - 594 x 662 x 426 mm
Weight - 27 kg / 59.1 lbs
Subject to change without notice
Please notice the following:
Impedance for BC210, BC212 is
8 Ohm
Impedance for BC410 is
4 Ohm
All TC Electronic bass amplifiers can run any combination of up to three
TC Electronic
8 Ohm cabinets, or up to two 8 Ohm cabinets of another
brand.
Depending on the TC Electronic amplifier model, a BC410 (4 Ohm)
cabinet can be combined with one or two other cabinets.
Please refer to our speaker configuration guide located at
www.tcelectronic.com/cabconfig
Should you by accident connect a non-valid combination of cabinets
to TC Electronic bass amplifiers, the amps protection mode may be
invoked. However, the amplifier will not be damaged.