CONFIG. M5000
M5CONFIG
Rev 1.3 Page 3
SOFTWARE INSTALLATION
M5000
Here is the procedure for updating the application software in the M5000. You need to get to
the special M5000 Setup Utility menu to accomplish this.
1.
Turn the power off the M5000.
2.
Press the BYPASS button (
22
) while switching power on again. Hold it for a
few seconds. The
M5000 Setup Utility Menu
will appear.
3.
With the PROGRAM DIAL (
17
) you choose the appropriate option:
LOAD DISK/CARD
When DO is pressed the directory of the inserted
floppy disk or memory card will appear. Scroll
through the files with PROGRAM DIAL. Select the
file by pressing DO and confirm the choice by
pressing DO again. Software from floppy disk or
memory card will be loaded. The UNDO button works
as a cancel button and returns you to the Setup Menu.
SAVE DISK/CARD
Saves the application software to a formatted floppy
disk or memory card. By pressing DO you enter the
name menu which enables you to give the application
software a file name on the disk/card. On the top line
a file name is displayed with a cursor under the first
character - ready for editing.
SOFT DIAL A:
CURSOR
Moves the cursor forward or backwards through
the name. The name can have a maximum of 8
characters.
SOFT DIAL B:
LETTERS
Selects a letter from A to z and inserts it in the
name over the cursor.
SOFT DIAL C:
FIGURES
As letters but numerical from 0 to 9.
SOFT DIAL D:
SYMBOLS
Inserts symbols instead of characters, e.g. blank
or space is a symbol found here.
(Press DO to confirm file name.)
LOAD MIDI
Enables you to receive software updates from another
M5000 (See SAVE MIDI) or you can use TC's
M5DUMP software package which enables you to
dump software to the M5000 via an IBM
tm
compatible
PC with a MIDI interface installed. This package is
available from TC's bulletin board free of charge for
M5000 USER CLUB members and instructions are
implemented with the program.
